DNS Server Not Responding: How to Fix DNS Not Responding on Windows 10

Every device that connects to the internet, sends a request to a DNS server that redirects the request to the correct website. A slow DNS server means that a web address takes longer to resolve, and while the delay may only be for a few seconds, you can see it.

Slow DNS is one problem but if the DNS server is not responding, basically you can’t get to anything. It’s not so much like having no internet connection. Of course, your internet may be working but the DNS may be preventing you from accessing any website.

DNS server not responding

Problems with the DNS server usually prevent you from accessing some or all websites. The error message you see will depend on the browser you are using and even with the same browser, you may see different error messages. Fixing a DNS server problem may be something you can do on your head or it may be a problem for your ISP.

DNS server is unresponsive

How to fix the DNS server is unresponsive error?

Before attempting to fix the problem, run through the following basic checks.

  • Restart your router.
  • Restart your system.
  • Forget and reconnect your WiFi network.
  • Try a different browser.
  • Try accessing the internet from a different device. If it doesn’t work, you may have a problem with your ISP.
  • Turn off your VPN if you are using one.

If the above does not work try the solutions below.

1. Switch to Google DNS

DNS server may go down. It is a service and like any service, there can be problems. Often, the easiest configuration is to switch to a Google DNS server that is free to use.

  1. Open Control Panel.
  2. go to Network and internet.
  3. Choose Network and sharing center.
  4. Click on your WiFi network.
  5. Click real estate fo na Action department.
  6. Double-click Internet Protocol Version 4 (TCP / IPv4).
  7. Enable the ‘Use the following DNS server addresses’ option.
  8. In Favorite DNS server, insert
  9. In Another DNS server, insert
  10. Click OK, and close all windows.
  11. Try it get to website.

2. Run the Internet Troubleshooter

Windows 10 has its own Internet Troubleshooter which can fix problems with the DNS. It managed to change the DNS server you are connecting to but may be able to resolve issues with the server setting.

  1. Open the Options app (Keyboard shortcut Win + I).
  2. go to Update and security.
  3. Select the Troubled tab.
  4. Click Additional solver.
  5. Run the Internet Connection Solver.
  6. Enter all configurations that he praises.

3. Flush DNS and IP update

If the Windows 10 resolver can’t fix problems with the DNS server, you can try manually flushing the DNS and updating your IP.

  1. Open Promptly forward with administrative rights.
  2. Run the following ordering one-on-one. They stream the DNS and update your IP address.
netsh int ip reset
netsh winsock reset
ipconfig /flushdns
ipconfig /renew
  1. Restart your system.

4. Manually configure a network

Internet connections tend to configure automatically once you enter the password but a lot is set under the hood. Setting up a network manually may help solve DNS problems.

  1. Open Prompt Command.
  2. Run this command: ipconfig /all.
  3. look for Corporate Address but make sure it is for the network you are connecting to eg, note the physical address for a wireless LAN if you are using a wireless network.

  1. Open File Explorer.
  2. Enter this in the place bar: Control PanelNetwork and InternetNetwork and Sharing Center and tap on Enter.
  3. Click on your link.
  4. Click real estate fo Action.
  5. Click on the Configure button.
  6. Go to Advanced Tab.
  7. look for MAC address or Network address.
  8. Enter the Physical address you noticed earlier and click OK.

5. Update the firmware of the router

Your router firmware may need to be updated. Normally, your ISP should be able to push a firmware update to the router during routine maintenance but you can manually update yourself. It may fix problems with the DNS.

To update the router firmware, you need to get to the router admin panel. You can access it from your router.

  1. Open Prompt Command.
  2. Run this command: ipconfig.
  3. Note down the Basic gateway address.
  4. Open to browser.
  5. Enter the Default gateway address and tap Enter.
  6. Sign in with the admin username and password.
  7. Look for the firmware update option and install available updates.

Note: the admin panel for each ISP and router is different so you need to look around.

6. Change DNS in the router

The router also has a DNS setting and may override your system’s DNS server setting. Access your router administration and change the DNS to Google DNS or let the router go to your computer’s DNS if there is an option for it. To change the DNS on the router, follow these steps.

  1. Open Prompt Command.
  2. Run this command: ipconfig.
  3. Note down the Basic gateway address.
  4. Open to browser and into the Default gateway address and tap Enter.
  5. Sign in to the router administration panel and look for DNS settings.
  6. Use Google DNS Server.
  1. Restart the router, and your system.

7. Run Windows 10 in safe mode

It is possible that an application on your system is blocking your DNS server or internet. To confirm this, you should run Windows 10 in Safe Mode.

  1. Open the Start the record.
  2. Click on the power button.
  3. Hold down the Move button and click Restart.
  4. On the boot screen, go to Troubleshoot> Advanced Options> Startup Options.
  5. Click Restart.
  6. Select the Safe mode option (with networking).
  7. Try accessing the internet.

8. Disable third-party apps

If you can access the Internet in Safe Mode, a third party may block the DNS or internet.

  1. Right-click on the taskbar and select Executive Manager.
  2. Go to Start tab.
  3. Turn off all apps.
  4. Restart the system.
  5. Get to the internet.
  6. If you can access the internet, a a third-party app appears to be responsible.
  7. Enable one-on-one apps to see which one is causing the problem.

9. Disable virtual adapter

Windows 10 basically creates a virtual adapter and usually, when an app is not available for use, it does not block a network connection. That said, it can cause problems and if it can help it will help.

  1. Open Device manager.
  2. go to View> Show hidden devices.
  3. Expand Network changers.
  4. look for Microsoft Virtual Direct Wi-Fi Adapter.
  5. Right click e and select Uninstall tool.
  6. Repeat this for all major adapter devices.
  7. Restart the system.

10. Turn off Ethernet, Bluetooth, Hotspot

Windows 10 can connect to a wireless network and Ethernet, Bluetooth, and Hotspot but can block an internet connection.

  1. Open the Options app (Keyboard shortcut Win + I).
  2. go to Tools> Bluetooth.
  3. Turn Bluetooth off from the version.
  4. Tap on the Win + Keyboard shortening.
  5. Turn the hotspot off the toggle.
  6. Disconnect no unplug the Ethernet cable.
  7. Restart the system.


If the above solutions do not work, you should contact your ISP, especially if the issue is present on other devices. They may be able to fix the problem or tell you if their service is having problems. In that case, you have to wait for them to finally resolve.

The post DNS Server Not Responding: How to set DNS unresponsive Windows 10 first appeared on TechtricksNg.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top