How to find the temperature for the on-board graphics card on Windows 10

Keeping your system running at a normal temperature, or keeping it from overheating is as basic as keeping the system dry (and away from liquids / spills). Typically, when we talk about system temperature, we study the temperature of two parts of hardware; the CPU and GPU.

Both of these parts are important but they are not the only ones that can get hot from intense use. If you have a GPU on your system, of course you have two graphics cards; onboard graphics card and special card.

The onboard graphics card gets hot too but you may never know how hot it gets as there are not many tools built to detect the temperature of the onboard graphics card. Unless you have a dedicated GPU, the onboard graphics card handles everything and you need to know how hot it is to keep it from being damaged.

Temperature sensors

To detect the temperature of any component on your system, it must have its own temperature sensors. GPUs always have a temperature sensor because they are going to be intensively used and handle heavy tasks. On-board graphics cards usually do not have a temperature sensor.

CPU temperature is the closest thing or sensor that can be approximated to your graphics card, please check first to see if, at the opportunity, it has a sensor own temperature at your graphics card.

Check system temperature sensors

To see which devices have a temperature sensor, follow the steps below.

  1. Download and run a free app called GPU-Z.
  2. Go to Tab sensors.
  3. Look through the list and see if anything related to the onboard graphics card.

On-board graphics card temperature

Without a temperature sensor, you have to rely on other sensors. They will not give you an accurate reading of the temperature of the onboard graphics but will know enough how hot your onboard graphics card is. In this case and in most cases, you should depend on the CPU temperature.

Find CPU temperature

Since we are going by estimates here, it is a good idea to check the temperature of each CPU core. From the image below, you can see that GPU-Z shows the CPU temperature but it gives you the total value and not the values ​​of the individual cores.

To find the temperature of individual CPU cores, follow these steps.

  1. Download, install, and run Core Temp.
  2. Look through list of rights and note down the temperature for the coriander.
  3. Pay attention to the maximum and minimum temperature for each heart to estimate the temperature of the onboard graphics card.

Adding temperature sensors

It will not be possible to add a temperature sensor to your onboard graphics card. If you find that it often runs too hot, you should try thermal paste, make sure your system is seated in a well-ventilated area, and make sure the fans are on. the system is running. You can add additional fans to a desktop system.

You should know that on-board graphics cards are not intended to handle heavy tasks. If you rely on it to handle graphics intensive tasks, you should consider getting a GPU. They are expensive but come in low, medium and higher price ranges. If you keep relying on the onboard graphics card, your system may become unstable if it heats up, it could eventually suffer hardware damage.

The post Revealed how to find the temperature for the onboard graphics card on Windows 10 first on TechtricksNg.

Leave a Comment

×