Blue screen errors take over your computer and stop you from using it. Each type of error has its own specifications, but most of them can be resolved by following a set of well-defined instructions.
Whatever problem you might be experiencing, keep in mind that all BSOD errors can be repaired. Take Faulty Hardware Corrupted Page, for instance. It’s triggered by hardware corruption in order to prevent major data loss on your computer.
Faulty Hardware Corrupted Page Error
To repair the Faulty Hardware Corrupted Page error means to identify and resolve the underlying issue. Here are some possible causes:
- Your hard disk has bad sectors
- The operating system has missing or corrupt files
- Windows or device drivers are outdated
- Your firewall settings are incorrect
- Certain software applications you have installed might conflict with each other
- Some external devices might not be compatible with your PC
- Your GPU, CPU or RAM is overclocked
There are multiple approaches to fixing the Faulty Hardware Corrupted Page stop code. Before getting started, though, it’s a sound idea to create a Windows restore point. In case you make any mistakes and need to start again from scratch, you can simply roll back your operating system to a saved checkpoint.
One more essential aspect we should make clear from the start is that, if you can’t use your computer at all because it enters a restart loop due to Faulty Hardware Corrupted Page, interrupt the Windows boot sequence three times to trigger Advanced Startup mode. It will grant you access to critical tools required in the following solutions.
How to Fix the faulty_hardware_corrupted_page Error
1. Repair HDD errors
We’re going to start with the most obvious solution: repairing any bad sectors that your hard disk could be experiencing. No special tools are required for this job since you can turn to CHKDSK (Check Disk), an internal utility that can be operated from Command Prompt.
How to run CHKDSK:
- Click the Start button, search for Command Prompt, and click Run as administrator
- If prompted by UAC (User Account Control), click Yes
chkdsk c: /fif your operating system is installed on the C: drive. Else, replace
c:with the correct partition letter. Press Enter
- You will be asked to schedule CHKDSK during the next system boot. Type y and hit Enter
- Restart your computer
- During reboot, CHKDSK will do its job. Once it finishes, start Windows as normal and check for BSOD errors
You can also access Command Prompt from Advanced Startup mode if you can’t boot to Windows due to hard disk corruption.
2. Fix damaged OS files
Your operating system could have corrupt files that prevent its processes from running properly. As a result, you could be experiencing BSOD error Faulty Hardware Corrupted Page. But you can fix it by running SFC (System File Checker), another command-line utility that comes bundled with Windows 10.
How to run SFC:
- Press Win key + R, type cmd, and press Ctrl + Shift + Enter to open Command Prompt with elevation rights
sfc /scannowand press Enter
- Patiently wait while SFC does its job. Once it finishes, restart your computer
- Check for BSOD errors now
If SFC is not enough to get rid of your blue screen issues, you should turn to DISM (Deployment Image Servicing and Management). It’s a more powerful tool capable of repairing any issues found in the component store of the Windows image. Just like SFC and CHDKSK, DISM can be found within Windows and handled from the console environment.
How to use DISM:
- Run Command Prompt with administrator rights
DISM /online /cleanup-image /scanhealthand hit Enter
- If it shows any errors, run
DISM /online /cleanup-image /restorehealthto fix them
- Wait while DISM does its magic. When it finishes, restart your computer
- Launch Command Prompt as admin again
- Run SFC (
- After SFC finishes, restart your PC again
- Check for blue screen errors now
3. Update Windows 10
Your operating system should be kept updated so that your computer can take advantage of the latest hotfixes and security patches. If Windows 10 doesn’t automatically fetch updates on your PC, here’s what you should do:
- Press the Windows key, type check for updates, and press Enter
- Click Check for updates
- If there’s anything available, click Download
- Your computer might restart several times, especially if you haven’t made updates for a long time
- Once it boots, check for BSOD errors
4. Uninstall Windows updates
On the other hand, you should also take into account that certain system updates can damage your computer and cause BSOD errors. When that happens, you should get rid of the faulty update to restore the stability of your computer.
How to uninstall recent system updates:
- Click the Start button, search for Control Panel, and press Enter
- Select Programs and Features
- Click View installed updates on the left side
- Click the Installed On column to sort all system updates (newest first)
- Double-click the first update in the list to uninstall it
- Click Yes to confirm and proceed with on-screen instructions
- Restart your computer and check for blue screen issues
5. Update your drivers
If your drivers are outdated, it could be the reason why your screen turns blue and shows the Faulty Hardware Corrupted Page error message. To fix this issue, you should update your drivers.
How to update drivers on Windows 10:
- Right-click the Start button and select Device Manager
- Explore the list of all devices in Device Manager
- Right-click a device and select Update driver
- When you get two options, go with Search automatically for drivers
- Wait for a bit. If the online search doesn’t show anything, click Search for updated drivers on Windows Update. But if you already updated Windows 10 to the newest version, you can skip this step
- Check if you still get BSOD errors on your computer
If you don’t know which drivers are obsolete, we suggest resorting to a driver update software application since it will save you a lot of time. It automatically detects all outdated drivers and brings them to the newest version. Plus, you can use it for all types of drivers.
6. Roll back your drivers
Incompatible drivers can cause more damage than outdated ones. In case you accidentally installed a version that’s not compatible with your operating system and hardware, you should immediately roll back the driver to a previous, stable version. It’s not necessary to use a third-party software application since Device Manager is enough for the job.
How to roll back drivers on Windows 10:
- Right-click the Start button and head over to Device Manager
- Select a problematic device and double-click it to view its properties
- Switch to the Driver tab
- Click the Roll Back Driver button and follow the on-screen instructions
- If you can’t click the button because it’s greyed out, it means you can’t perform the rollback because a previous driver doesn’t exist on your PC
7. Use the Hardware and Devices troubleshooter
The Hardware and Devices troubleshooter is a component that comes bundled with Windows 10 and helps you fix common hardware and devices issues. It’s worth a shot when it comes to repairing the Faulty Hardware Corrupted Page error. If you can’t find the Hardware and Devices troubleshooter in Settings > Additional troubleshooters, you can fire it up from the Run utility. Here’s how:
- Press the Win key + R, type
msdt.exe -id DeviceDiagnostic, and press Enter
- Click Next and follow the wizard steps
- If it finds any solutions, click Apply this fix
- Restart your operating system
- Check for blue screen messages now
8. Reinstall hardware devices
If you have recently attached new devices to your computer or laptop, perhaps they weren’t properly installed. It even applies to adapters with plug-and-play features. However, you can easily solve this problem at the software level, thanks to Device Manager.
How to quickly reinstall devices:
- Right-click the Start button and go to Device Manager
- Look for any device with a yellow exclamation point
- Right-click it and select Uninstall device
- Click Uninstall to confirm
- Open the Action menu and pick Scan for hardware changes
- Restart your computer. Your OS will auto-reinstall the missing device
- Check for BSOD errors now
9. Remove peripheral devices
If the device reinstall didn’t do the trick, make sure to detach any new peripheral devices that are currently connected to your computer. Consider any piece of equipment you recently purchased or received as a gift.
It could be anything, from a webcam or printer to a Wi-Fi adapter or headphones. Shut down your PC and remove everything if you’re unsure, except for your keyboard and mouse.
Then, boot Windows to confirm that you’re no longer getting the Faulty Hardware Corrupted Page stop code. At this point, you can start replugging the devices one at a time to see which triggers the blue screen message.
10. Clean your hardware components
Another possibility is that you have malfunctioning ports. Just plug the devices into different sockets, assuming that you have multiple identical ports. It’s also a good idea to check your cables for scratches and replace them if necessary.
And, if you’re handy with your computer, consider taking it apart to clean off the dust. Pay special attention to your cooler while you’re at it since the Faulty Hardware Corrupted Page error could be caused by overheating.
It’s also a good idea to remove and reseat your devices. Just take them out of their sockets and put them back it firmly but without using force. You can do this with your motherboard and CPU, for instance.
11. Check your RAM
Since we’re discussing hardware parts, you should make sure that your system memory is working properly. It’s not necessary to analyze the RAM card since you can turn to a software utility built into Windows 10, called Windows Memory Diagnostic.
How to use Windows Memory Diagnostic:
- Save any ongoing projects and close all applications
- Click the Start button, type Windows Memory Diagnostic, and open this tool
- Click Restart now and check for problems (recommended)
- Windows will reboot and start checking your RAM for issues
- When it finishes, check for BSOD errors
Windows Memory Diagnostic shows basic information about your system memory. If you’re looking for something a bit more advanced, we suggest checking out MemTest86.
12. Scan your PC for malware
Some malware attacks are serious enough to disarm your computer’s defenses and disable essential files, processes, or services. They could even lead to the Faulty Hardware Corrupted Page error. So it’s up to you to find and eliminate these threats.
If you don’t have a specific Internet security solution installed, then you can turn to Defender on your Windows 10 PC. Here’s what you need to do:
- Click the Start button, search for Windows Security and hit Enter to launch this application
- Go to Virus & threat protection
- Click Scan options
- Select Quick scan and click Scan now
- If the search results don’t return anything, select Windows Defender Offline scan and click Scan now
- Follow the on-screen instructions to quarantine or remove any infected files
- Restart your computer and check for BSOD errors
13. Uninstall recent software
If you have recently installed third-party software programs on your computer, it’s possible that they aren’t fully supported by Windows 10. As a result, you might be seeing the Faulty Hardware Corrupted Page error on a blue screen. To fix this problem, you should remove any unknown or suspicious programs.
How to remove recent apps:
- Press the Win key, type Apps & features, and press Enter
- Click Sort by and select Install date to sort the programs by date of installation (newest first)
- Choose the first unknown or suspicious program from the list
- Click Uninstall and then again to confirm
- Follow the wizard steps to remove the application
- Reboot your computer and inspect results
14. Temporarily disable your firewall
Your firewall could prevent critical system processes from reaching the Internet and performing required tasks. If you or someone else has tinkered with your computer’s default firewall configuration, it’s a good idea to temporarily turn off the firewall to put this theory to the test.
How to turn off Windows Firewall:
- Press Win key + R, type control panel, and hit Enter
- Select Windows Defender Firewall
- Click Turn Windows Defender on or off (you need administrator rights)
- At Private network settings and Public network settings, select Turn off Windows Defender Firewall
- Click OK and restart your computer
In case you have a third-party firewall application installed, adapt the steps above to turn it off. However, even if your firewall turns out to be culprit that triggered the Faulty Hardware Corrupted Page stop code, it’s definitely not wise to leave it turned off because it means putting your PC at risk.
But you can solve this problem by reverting your firewall to factory mode. Keep in mind that it means undoing all preferences you might have customized there, and some applications might stop working correctly. Caution is advised.
How to restore firewall settings to default:
- Press the Win key, type firewall, and open Firewall & network protection
- Click Restore firewalls to default
- Then, click Restore defaults and Yes to confirm
15. Temporarily disable your antivirus
Not only your firewall but also your antivirus solution can block critical system files from establishing an Internet connection. It usually happens after installing a new anti-malware solution with a different default configuration than Windows, or whose default settings you have modified.
To check this, turn off your antivirus application long enough to see if you still get the Faulty Hardware Corrupted Page stop code. In case you don’t, then you must change the security settings of the application and, if that’s not possible, just remove the program from your PC.
16. Check your storage capacity
Insufficient disk space can cause serious problems to your computer, including Blue Screen of Death errors like Faulty Hardware Corrupted Page. It’s because Windows doesn’t have enough room to store temporary files and carry out its processes.
To fix this problem, you can allocate disk space with the help of a partition manager. And, if you don’t want to go through the trouble of installing an external software application, you can comfortably use the Disk Management tool.
How to use Disk Management:
- Right-click the Start button and select Disk Management
- Select a large partition that doesn’t contain Windows
- Right-click this partition and select Shrink Volume
- Set its new volume size and click Shrink to confirm
- Once returned to the main window of Disk Management, right-click the Windows drive and choose Extend Volume
- Write the new volume size by adding all the free space you obtained from the other partition
- Click Extend to confirm
- This process can take a while. Once it’s finished, reboot your PC
- Check if you still get blue screen errors
Another way to obtain disk space is by removing existing files. For instance, you should copy large archives, photos and videos to an external disk space and delete them from your internal hard disk. Or, you can burn them to DVDs or upload the files to cloud storage accounts.
It’s also a good idea to uninstall huge applications and games that you rarely or never use. Junk files can be deleted, too. In fact, it’s recommended to do so. You can turn to a specialized system cleaner like CCleaner or, if you don’t want to install anything, you can resort to the built-in Disk Cleanup utility.
How to use Disk Cleanup:
- Sign in to Windows 10 using an administrator account
- Go to Downloads and Recycle Bin to save or restore any files you might need later
- Press Win key + R, type control panel, and hit Enter
- Select Administrative Tools
- Double-click Disk Cleanup to start this application
- Select the Windows partition (usually C:) and click OK
- At Files to delete, make sure to select everything. Then, click Clean up system files
- After the file search is over, select all items again and click OK
- Wait until Disk Cleanup does its job (it might take a while). Don’t use your computer, shut down or turn it off during this time
- Once Disk Cleanup is done, restart the PC and check for BSOD errors
17. Turn off Fast Startup
Fast Startup is a special feature that speeds up the Windows startup, shutdown, and wake-up sequence by leaving some processes turned on. However, many users have reported that they keep getting blue screen errors like Faulty Hardware Corrupted Page due to this feature.
To resolve this matter, you should turn off Fast Startup mode:
- Click the Start button, search for Control Panel, and open this tool
- Select Power Options
- On the left part of the window, click Choose what the power buttons do
- Click Change settings that are currently unavailable (you need admin rights)
- Uncheck the Turn on fast startup (recommended) box
- Click Save changes
- Restart your PC and inspect results
18. Disable autostart apps
Certain applications get integrated into the Windows startup sequence so that they get launched automatically every time you turn on your PC. Most enable this feature during installation and without asking for your permission.
Some of these programs must absolutely run at every system startup. For example, an anti-malware tool must start protecting your PC before Windows even boots. However, others are completely unnecessary and only contribute to a slower boot time. In rare cases, startup apps can cause blue screen messages like Faulty Hardware Corrupted Page, so you should fix this issue immediately.
How to disable startup apps:
- Press Ctrl + Shift + Esc to start Task Manager
- Switch to the Startup tab
- If you have many apps in this list, click Status to sort them by status (Enabled first)
- Inspect each app with the Enabled status to see which one is non-essential (for example, Windows Security should be left enabled)
- Select an app and click Disable
- Do this for as many apps as necessary
- Exit Task Manager, restart your PC, and check for BSOD issues
19. Turn off hardware acceleration
Web browsers, games and other applications use hardware acceleration to improve your experience. However, if your computer is not powerful enough for hardware acceleration, you shouldn’t be surprised if you get blue screen errors like Faulty Hardware Corrupted Page.
To fix this problem, you should disable the hardware acceleration features across all your applications. When it comes to the most popular web browsers, check out the following instructions.
How to switch off hardware acceleration in Google Chrome:
- Fire up Chrome
- Open the More menu from the upper-right corner
- Go to Settings > Advanced > System (or visit
- Turn off Use hardware acceleration when available
- Restart Chrome and check for BSOD issues
How to switch off hardware acceleration in Mozilla Firefox:
- Start Firefox
- Click the ≡ button next to the address bar on the right
- Select Options (or go to
- In the General section, find Performance
- Uncheck the Use recommended performance settings box
- It will show an additional option called Use hardware acceleration when available. Uncheck its box, too
- Relaunch Firefox and inspect results
How to switch off hardware acceleration in Microsoft Edge:
- Open Edge
- Click the More button and go to Settings > System (or visit
- Disable Use hardware acceleration when available and click Restart
- Check for BSOD errors now
20. Disable overclocking
Overclocking tools are generally used by users to speed up their computers when playing high-demanding games. For example, it’s possible to overclock the memory. However, if it’s not done properly, overclocking can end up harming your computer and triggering blue screen errors such as Faulty Hardware Corrupted Page.
If you have overclocking tools installed on your PC, such as MSI Afterburner, CPU-Z or GPU-Z, make sure to turn them off and reset your computer’s clock settings by default. However, if you enabled overclocking in BIOS, proceed to the following solution.
21. Reset BIOS
You can control a wide range of computer settings from BIOS, including overclocking, caching, and shadowing. However, if you have misconfigured the BIOS options, you might have inadvertently caused stop code Faulty Hardware Corrupted Page on your Windows 10 PC.
How to reset BIOS settings to default:
- Shut down and restart your computer
- During reboot, press the key shown on the monitor to enter the PC BIOS mode
- Go to the advanced options
- Locate and turn on the setting that resets the BIOS configuration data to default
- Save the new BIOS options and exit
- Once Windows boots, check if your still have blue screen issues
22. Update BIOS
Just like your operating system and applications, your BIOS must be updated in order to maintain the optimal performance of your computer. If you haven’t updated BIOS for a long time, you shouldn’t dwell on it any longer. Here’s what you need to do:
- Find an empty USB pen drive and connect it to your computer
- On the desktop, click the Start button, type System Information, and launch this program
- In the System Summary section, check out the BaseBoard Manufacturer and BIOS Version/Date
- Exit System Information
- Using the information obtained from BaseBoard Manufacturer, visit the official website
- By taking into account the BIOS Version/Date, find a newer BIOS version
- Download the archive and unzip it to your USB flash drive
- Restart your computer and press the key displayed on the screen to access BIOS mode
- Set up a backup of the current BIOS version and save it to your pen drive
- Start the BIOS update and follow the on-screen instructions
- After the BIOS update, boot Windows as usual and check for BSOD errors
If you encounter additional system stability issues after performing the BIOS update, make sure to roll back to the previous version you saved on your pen drive.
23. Fix registry settings
Any significant changes made to the system registry recently could have caused computer problems and the Faulty Hardware Corrupted Page stop code. You can try using a registry cleaner but it probably won’t work as expected. Instead, check out the following easy instructions:
- Press the Windows key, type Registry Editor, and open this app
- In Registry Editor, open the File menu and select Export
- Set a new name and saving destination to create a registry backup (.reg format)
- Click Save and quit Registry Editor
- Right-click the Start button and select Settings
- Go to Update & Security
- Select Recovery on the left side
- At Advanced startup, click Restart now
- Your operating system will restart in Advanced startup mode
- Go to Troubleshoot > Advanced options > Command Prompt
- Copy and paste the next commands (press Enter after each line of text):
ren c:WindowsSystem32configDEFAULT DEFAULT.old
ren c:WindowsSystem32configSAM SAM.old
ren c:WindowsSystem32configSECURITY SECURITY.old
ren c:WindowsSystem32configSOFTWARE SOFTWARE.old
ren c:WindowsSystem32configSYSTEM SYSTEM.old
copy c:WindowsSystem32configRegBackDEFAULT c:WindowsSystem32config
copy c:WindowsSystem32configRegBackDEFAULT c:WindowsSystem32config
copy c:WindowsSystem32configRegBackSAM c:WindowsSystem32config
copy c:WindowsSystem32configRegBackSECURITY c:WindowsSystem32config
copy c:WindowsSystem32configRegBackSYSTEM c:WindowsSystem32config
copy c:WindowsSystem32configRegBackSOFTWARE c:WindowsSystem32config
- Reboot your computer and check for BSOD errors
24. Start Windows in Safe Mode
If you’re having trouble using your computer because your operating system gets sent into a reboot loop due to stop code Faulty Hardware Corrupted Page, you can start Windows 10 in Safe Mode. It means disabling all non-important processes, services, and drivers that might prevent your PC from working normally.
How to boot Windows 10 in Safe Mode:
- Click the power button in the Start menu
- While holding down the Shift key, click Restart to reboot your PC in Advanced Startup mode
- Head over to Troubleshoot > Advanced options > Startup Settings
- Click Restart
- Press F4 to start Windows in Safe Mode
- Once your operating system starts, check if you still receive BSOD errors
25. Use System Restore
If you started getting the Faulty Hardware Corrupted Page error code after a recent software change on your computer, you can roll back Windows 10 to a previous checkpoint to undo the modifications and regain the stability of your computer.
However, the restore point must have been created before you started receiving blue screen messages. Furthermore, keep in mind that it means any programs installed after that point will disappear from your PC, so you will have to reinstall them and activate any premium editions.
How to use System Restore:
- Make sure you’re signed in with an administrator account
- Press the Win key, search for Control Panel, and open this app
- Go to Recovery
- Click Open System Restore
- Select a restore point on the list. If you have multiple entries available, check the Show more restore points box
- Your Windows PC will reboot afterward. Check for BSOD issues after
26. Consult Event Viewer
Event Viewer captures information about all major events happening on your computer, including system crashes. If you can’t figure out what’s causing your screen to turn blue and lock you out, you can turn to Event Viewer for help. Here’s what you need to do:
- Click the Start button, search for Event Viewer, and open this app
- In the main app window, go to Windows Logs > System on the left side
- Select the first entry on the list that says Error
- Find out more about the crash in the General and Details tab
You can now look up for details about what’s causing the Faulty Hardware Corrupted Page error on the web. If you need a simplified tool for this purpose, we suggest turning to BlueScreenView. It’s a tiny, portable and intuitive program that captures logs about blue screen errors.
27. Reset Windows 10
If everything failed up until this point, it’s time to perform a factory reset on Windows 10. You shouldn’t worry about any personal documents, videos, photos or other files lying around on your PC since they will be protected. But all your programs will be removed, so you will have to reinstall them. Here’s what you need to do:
- Right-click the Start button and visit Settings
- Go to the Update & Security section
- Select the Recovery area on the left side
- At Reset this PC, click Get started
- Choose Keep my files and proceed with the steps
You can fix Faulty Hardware Corrupted Page on Windows 10
In conclusion, Faulty Hardware Corrupted Page is a Blue Screen of Death error that usually signals a hardware problem. To fix it, you can repair HDD errors and damaged system files, update Windows 10 or uninstall faulty system updates, update or roll back your drivers, as well as use the integrated Hardware and Devices troubleshooter.
It’s also a good idea to reinstall your hardware devices and unplug the incompatible ones from your PC, clean your hardware components, check your RAM card, scan your PC for malware, uninstall recent software programs, to temporarily disable your firewall and antivirus, and check your storage capacity.
Furthermore, you can turn off Fast Startup mode and disable autorun applications, turn off hardware acceleration across all your programs, disable overclocking mode, update and reset BIOS to factory settings, fix any broken registry entries, start Windows in Safe Mode, use System Restore, consult Event Viewer, and perform a factory Windows reset if everything else fails.
How did you manage to get rid of the Faulty Hardware Corrupted Page stop code? Did the solutions above help? Tell us more about your experience in the comments below.
The post How to Fix the Faulty Hardware Corrupted Page Stop Code on Windows 10 appeared first on TechtricksNg.