How to fix Wi-Fi keeps disconnecting on Windows 10

WiFi problems make it impossible to operate. If you work offline ie, in a word processor or spreadsheet, you may still need an active and reliable internet connection to sync backups of your work to a cloud driver. For almost everything else, you need the internet.

Wi-Fi keeps disconnecting on Windows 10

Fix WiFi keeps disconnecting on Windows 10

Laptops and desktops can connect to the internet via an Ethernet or WiFi cable. Most people prefer to use WiFi because it means no need to install cables and if you have a laptop, you can pick it up and take it anywhere without worrying about wiring.

If the WiFi on your laptop keeps disconnecting, go through these basic checks first;

  • Build the WiFi on your Windows 10 system, and then Next. You can do this by tapping Win + A to open Action Center. Click on the Airplane icon to enable Airplane mode. Wait a while, then click again to turn WiFi back on.
  • Restart the router. Your router may have run into a problem of its own. Turn it off, and turn it back on. Check if the problem persists.
  • Check if the WiFi keeps disconnecting on other devices. Try to connect a phone and if the problem persists, it is very likely that the problem is either with the router or with your service provider. Contact your service provider for a solution.

If the WiFi keeps reconnecting again and again on your system, try the solutions below.

1. Run the network problem

The first thing to do when you have connection issues of any kind is to run the network problem. This is a build tool on Windows 10 that addresses common connection problems.

  1. Open the Configuration application with keyboard shortcut Win + I.
  2. go to Update & Security.
  3. Select the Troubled tab.
  4. Click Additional troublemakers.
  5. Run the Internet Connection Solver.
  6. Enter all configurations that it recommends and restarts the system.

2. Wet DNS

WiFi connections are generally not affected by the DNS. If you are having problems with DNS, you will not be able to open any websites but you will still be connected to your wireless network. That said, it never hurts to flush the DNS.

  1. Open Promptly forward with administrative rights.
  2. Run this command: , code> ipconfig / flushdns
  3. Let the command to terminate and restart the system.

3. Reset adapter network

Try resetting the network adapter. Just as a router enters problems fixed by restarting, the same thing can happen to the network adapter.

  1. Open the Configuration application with keyboard shortcut Win + I.
  2. go to Network and internet.
  3. Select the Status tab.
  4. Click Advanced network settings.
  5. Click Reset.

4. Turn off VPN

If you are using a VPN, turn it off. The app you are using may not be compatible with Windows 10 or you may not have the correct drivers installed to connect the VPN and stay connected. Turn off the VPN and make sure the disconnections stop.

5. Change WiFi frequency

WiFi usually communicates over a certain frequency but if the frequency is too busy, it will start dropping some connected devices. Think of it as a busy highway. The simple configuration is to change how often your system connects.

For your router;

  1. Connect your laptop / desktop to your router via LAN cable.
  2. Access to the router administration panel.
  3. Look for anything related connection conditions and / or connections.
  4. Change the frequency up to 2.5Ghz. This frequency has a shorter range but will be less busy.

On your Windows 10 system;

  1. Open Device manager.
  2. Expand Network changers.
  3. Double-click your wireless network card.
  4. go to Advanced.
  5. Look for a frequency-related entry (will vary based on network card model).
  6. Set it to 2.5Ghz.

Restart the router and system.

6. Enable Windows Defender (anti-third-party virus)

if you are using a third-party anti-virus, turn it off and turn on Windows Defender. Some anti-virus apps have particularly strict virus definitions and tend to block many incoming connections. If the problem is gone, you can continue using Windows Defender or you can add your wireless network to a safe list in your anti-virus app.

7. Change power management options

If your WiFi works after a period of inactivity or after you wake up from sleep, it is likely that your system is turning off the WiFi. This is a power management feature and you can easily disable it.

  1. Open Device manager.
  2. Expand Network adapters.
  3. Double-click your wireless network chip.
  4. go to Power Management.
  5. Uncheck the ‘Allow the computer to turn off this device to save power’ option.
  6. Restart the system.

8. Don’t forget other networks

If you are in a range of other networks, Windows 10 may be trying to connect to them, and failing. The simple solution here is to ignore the other networks.

  1. Open the Configuration application with keyboard shortcut Win + I.
  2. go to Network & Internet.
  3. Select the Status tab.
  4. Click Manage known networks.
  5. Select all networks one-on-one, and click Forget.
  6. Feuch connecting to a network.

9. Uninstall and reset network adapter

Uninstalling and reinstalling the network adapter allows you to hard reset.

  1. Open Device manager.
  2. Expand Network adapters.
  3. Right-click on your wireless card and select Uninstall tool.
  4. Confirm that you want to uninstall the device.
  5. Restart the system.
  6. Open Device manager.
  7. Click on the Scan for hardware changes button.
  8. Windows 10 and reinstall the network adapter.
  9. Restart the system.

10. Turn off WiFi Sense

Windows 10 has a feature called WiFi Sense that allows your device to connect to networks created by your contacts. It is widely used and tends to cause attachment problems.

  1. Open the Configuration application with keyboard shortcut Win + I.
  2. go to Network & Internet.
  3. Select the WiFi tab.
  4. Click Manage WiFi settings.
  5. Turn the Link to suggested open spaces and Connect to networks shared by my acquaintances.
  6. Restart the system.

Note: This option may not be available for all systems.

Conclusion

WiFi connection problems are rare if you have not changed drivers or installed network resources. If you have installed such apps, remove them. If your problem persists, your hardware may be damaged. Consider bringing it in for study.

The post How to Set up Wi-Fi Disconnect on Windows 10 appeared first on TechtricksNg.

Leave a Comment